Specification : | AISI 4130 Flanges |
Connect Type: | LJF, RF, FF, LMF, SMF, RTJ |
Size Chart : | 1/2″ (15 NB) To 48″ (1200NB) |
Production Process: | Machined, Heat Treated, Forged |
Common Types of Flange : | Flanges 150 LB WNRF Class 300 RTJ 600# BLRF Class 900 SORF |
Supporting Flange Material: | Flange Bolts, Gasket, Ring Joint |
Application: | Water Pipeline Industry Chemical Industry Nuclear Power Plant Natural Gas Industry Oil And Gas Industry Fabrication Industry |
Coating Flange Faces : | Zinc Plated, Yellow Transparent, Anti-rust Paint, Cold and Hot Dip Galvanized, Oil Black Paint |
Standards: | JIS Flanges, ISO Flanges, GOST Flanges, UNI Flanges, AWWA Flanges, MSS SP44 Flanges, ASME B16.38 Flanges, EN-1092 Flanges, BS10 Flanges, DIN Flanges, PN Flanges, ASME B16.5 Flanges, ASME B16.47 (Series A, Series B) Flanges |
Pressure Rating Table: | Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS |
Design For Size: | EN Flanges, ASA Flanges, ASME Flanges, DIN Flanges, JIS Flanges, ANSI Flanges, BS Flanges, PN Flanges |
Flange Machining Equipment: | Bending machine, Pushing Machine, Sand-blasting machine, Press machine, Electric bevelling machine etc |
AISI Number | C |
Mn |
P Max. |
S Max. |
Si |
Ni |
Cr |
Mo |
AISI 4130 |
0.28/0.33 |
0.40/0.60 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
AISI 4137 |
0.35/0.40 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
AISI 4140 |
0.38/0.43 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
AISI 4142 |
0.40/0.45 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
4145 |
0.43/0.48 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
AISI 4147 |
0.45/0.50 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
4150 |
0.48/0.53 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15/0.25 |
AISI 4161 |
0.56/0.64 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.70/0.90 |
0.25/0.35 |
4320 |
0.17/0.22 |
0.45/0.65 |
0.035 |
0.040 |
0.20/0.35 |
1.65/2.00 |
0.40/0.60 |
0.20/0.30 |
AISI 4340 |
0.38/0.43 |
0.60/0.80 |
0.035 |
0.040 |
0.20/0.35 |
1.65/2.00 |
0.70/0.90 |
0.20/0.30 |
4419 |
0.18/0.23 |
0.45/0.65 |
0.035 |
0.040 |
0.20/0.35 |
— |
— |
0.45/0.60 |
AISI 4615 |
0.13/0.18 |
0.45/0.65 |
0.035 |
0.040 |
0.20/0.35 |
1.65/2.00 |
— |
0.20/0.30 |
4620 |
0.17/0.22 |
0.45/0.65 |
0.035 |
0.040 |
0.20/0.35 |
1.65/2.00 |
— |
0.20/0.30 |
AISI 4621 |
0.18/0.23 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
1.65/2.00 |
— |
0.20/0.30 |
4626 |
0.24/0.29 |
0.45/0.65 |
0.035 |
0.040 |
0.20/0.35 |
0.70/1.00 |
— |
0.15/0.25 |
AISI 4718 |
0.16/0.21 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.90/1.20 |
0.35/0.55 |
0.30/0.40 |
4720 |
0.17/0.22 |
0.50/0.70 |
0.035 |
0.040 |
0.20/0.35 |
0.90/1.20 |
0.35/0.55 |
0.15/0.25 |
AISI 4815 |
0.13/0.18 |
0.40/0.60 |
0.035 |
0.040 |
0.20/0.35 |
3.25/3.75 |
— |
0.20/0.30 |
4817 |
0.15/0.20 |
0.40/0.60 |
0.035 |
0.040 |
0.20/0.35 |
3.25/3.75 |
— |
0.20/0.30 |
AISI 4820 |
0.18/0.23 |
0.50/0.70 |
0.035 |
0.040 |
0.20/0.35 |
3.25/3.75 |
— |
0.20/0.30 |
5120 |
0.17/0.22 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.70/0.90 |
— |
AISI 5130 |
0.28/0.33 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
— |
5132 |
0.30/0.35 |
0.60/0.80 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.75/1.00 |
— |
AISI 5135 |
0.33/0.38 |
0.60/0.80 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.05 |
— |
5140 |
0.38/0.43 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.70/0.90 |
— |
AISI 5145 |
0.43/0.48 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.70/0.90 |
— |
5147 |
0.46/0.51 |
0.70/0.95 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.85/1.15 |
— |
AISI 5150 |
0.48/0.53 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.70/0.90 |
— |
5155 |
0.51/0.59 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.70/0.90 |
— |
AISI 6150 |
0.48/0.53 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
— |
0.80/1.10 |
0.15 min. |
8615 |
0.13/0.18 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8617 |
0.15/0.20 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
8620 |
0.18/0.23 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8622 |
0.20/0.25 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8625 |
0.23/0.28 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
8627 |
0.25/0.30 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8630 |
0.28/0.33 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
8637 |
0.35/0.40 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8640 |
0.38/0.43 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
8642 |
0.40/0.45 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8645 |
0.43/0.48 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
AISI 8655 |
0.51/0.59 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.15/0.25 |
8720 |
0.18/0.23 |
0.70/0.90 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.20/0.30 |
AISI 8740 |
0.38/0.43 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.20/0.30 |
AISI 8822 |
0.20/0.25 |
0.75/1.00 |
0.035 |
0.040 |
0.20/0.35 |
0.40/0.70 |
0.40/0.60 |
0.30/0.40 |
9254 |
0.51/0.59 |
0.60/0.80 |
0.035 |
0.040 |
1.20/1.60 |
0.60/0.80 |
— |
— |
AISI 9255 |
0.51/0.59 |
0.70/0.95 |
0.035 |
0.040 |
1.80/2.20 |
— |
— |
— |
9260 |
0.56/0.64 |
0.75/1.00 |
0.035 |
0.040 |
1.80/2.20 |
— |
— |
— |
NPS | Flanges ID (inch) |
Flanges OD (inches) |
||||
Alloy Steel Class 150 | Alloy Steel Class 300 | Alloy Steel Class 400 | Alloy Steel Class 600 | Alloy Steel Class 900 | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
Standard | Class | Dia. | Bolt Circle Dia. | No.of Bolts | Bolt Size | Dia. of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI A182 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
AISI 4130 Reducing Flanges
AISI 4130 Weld Neck Flanges
AISI 4130 Blind Flanges
AISI 4130 Flat Face Flanges
AISI 4130 RTJ Flanges
AISI 4130 Raised Face Flanges
AISI 4130 Socket Weld Flanges
AISI 4130 Slip On Flanges
AISI 4130 Orifice Flanges
AISI 4130 Spectacle Flanges
Max. Working Pressure | 2,000 PSI | 3,000 PSI | 5,000 PSI | 10,000 PSI | 15,000 PSI | 20,000 PSI |
Test Pressure | 3,000 PSI | 4,500 PSI | 7,500 PSI | 15,000 PSI | 22,500 PSI | 30,000 PSI |
Product Specification Levels | 1, 2, 3 & 4 | 1, 2, 3 & 4 | 1, 2, 3 & 4 | 1, 2, 3 & 4 | 1, 2, 3 & 4 | 1, 2, 3 & 4 |
API Temperature Rating | K (-60 Deg C) | K (-60 Deg C) | K (-60 Deg C) | K (-60 Deg C) | K (-60 Deg C) | K (-60 Deg C) |
To | To | To | To | To | To | |
Y (+345 Deg C) | Y (+345 Deg C) | Y (+345 Deg C) | Y (+345 Deg C) | Y (+345 Deg C) | Y (+345 Deg C) |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | EN |
AISI 4130 | 1.7218 | G41300 | JIS G4105 | BS 970 | 25CrMo4 |
Properties | Metric | Imperial |
Tensile strength, ultimate | 560 MPa | 81200 psi |
Tensile strength, yield | 460 MPa | 66700 psi |
Modulus of elasticity | 190-210 GPa | 27557-30458 ksi |
Bulk modulus (Typical for steel) | 140 GPa | 20300 ksi |
Shear modulus (Typical for steel) | 80 GPa | 11600 ksi |
Poissons ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (in 50 mm) | 21.50% | 21.50% |
Reduction of area | 59.6 | 59.60% |
Hardness, Brinell | 217 | 217 |
Hardness, Knoop (Converted from Brinell hardness) | 240 | 240 |
Hardness, Rockwell B (Converted from Brinell hardness) | 95 | 95 |
Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.) | 17 | 17 |
Hardness, Vickers (Converted from Brinell hardness) | 228 | 228 |
Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.) | 70 | 70 |
Properties | Metric | Imperial |
Density | 7.85 g/cm3 | 0.284 lb/in³ |
Melting point | 1432°C | 2610°F |
Properties | Metric | Imperial |
---|---|---|
Thermal conductivity (100°C) | 42.7 W/mK | 296 BTU in/hr.ft2. °F |